-
Ecoworks starter kit
Ecoworks Starter kit comes with all the product line in specific sizes (see description below). Most of the products are concentrated so It will last for a while
$225.15$237.00+taxEcoworks starter kit
$225.15$237.00+tax -
-
-
-
-
-
-
-
-
-
$13.64 – $57.29 +tax
-
-
$17.73 – $197.78 +tax
ecowashroom + head cleaner
$17.73 – $197.78 +tax -
-
$20.46 – $197.78 +tax
ecoall-surface cleaner
$20.46 – $197.78 +tax -
-
Kiwi grip
PRICE
From $ 49 to $ 162 USD. Presentations of 1 and 4 Gallons per jar. Includes 1 application roller.
FEATURES
Kiwi Grip is a revolutionary, durable, non-slip coating that spreads quickly and easily with our patented roller, offering a beautiful high-traction surface. By varying the application technique, the texture can be adjusted from a “pleasure boat” texture to a “work boat” texture with aggressive industrial grip.
As a homogeneous material, Kiwi Grip does not suffer from the problems encountered with products based on sand, nutshells, polymers, rubber particles or other fillers. Filler coatings tend to wear out and fillers fall off leaving an unsafe platform that is difficult to clean and even more difficult to recoat.
-
CLAMP JACKETS
PRICES
From $6 to $8 USD per Unit and from $12.510 to $13.140 USD per 100.000 Units
FEATURES
Made from Durable EPDM rubber, the unique sleeve design allows the clamp jacket to slip over the tail of a worn gear hose to provide a worker protection from cuts and abrasion from exposed clamp tails. These jackets are available in 4 sizes (Matching standard hose clamp width). On top of the obvious protection advantages of the clamp jacket gives your work a clean finished look.
-
Hose clamps
PRICE
From $ 3.00 to $ 14.00 USD
FEATURES
Made entirely of 316L stainless steel with rolled edges, non-perforated band and one-piece edged screw case.
-
O-RING KITS
PRICE
From $ 4.75 to $ 6.25 USD
FEATURES
Includes O-ring (2 units), set screws (5 units), Allen wrench, retaining compound and clamp jackets (4 units)
-
T ADAPTER KITS
PRICE
From $51 to $56 USD. Specific dimensions, references and prices according to table.
FEATURES
PYI offers T-Kits to help you facilitate the installation of the PSS mechanical seal. These T-Kits allow the installer to bypass a T from the seawater discharge line and supply water through a hose connector to the PSS mechanical seal.
-
Shaft retaining collars
PRICE
From $ 20 to $ 220 USD.
FEATURES
The Shaft Retaining Collar (CRE) is designed to protect the propeller and rudder shafts. Makes it easy to keep the axle and rudder inside the boat in the event of a coupling failure. Thanks to its simple design the (CRE) can be easily installed with the axle or rudder on site. Available to fit shafts from 1 “to 3” or 25 to 80mm.
-
MAINTENANCE KIT
PRICE
From $92 to $1160 USD
FEATURES
To ensure longevity and proper function of the PSS Shaft Seal, PYI provides a PSS Maintenance Kit to follow the PYI’s recommended maintenance schedule As with any rubber / silicone hose below the waterline, the PSS bellow must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI recommends that the bellow be replaced once every 6 years (For Type A Seals) and 8-10 years (For Type B or PRO Seals). During the bellow replacement, it is also recommended that the O-rings and set screws in the stainless-steel rotor are replaced, as well as the hose clamps. PYI includes all the necessary replacement parts in the PSS Maintenance Kit.